Відео

Nice just got this and going to test today. Thanks for the vid

After I saw your video I also bought TuneEcu ( also hate dealer robbery ;) TuneEcu 24,99 €. One year licence, up to 5 bikes licensed. Ordered four cheap interfaces on AliExpress, The second one I tried ( Konnwei) worked properly and I could reset the oil maintenance key. Thanks!

Set your bike to year 2000. Thats it. No more service light

‼️”minus it” I didn’t realize they speak Section 8 in Canada 🙂

Doing front & rear tires on a 2015 / FJ07 …… most helpful !!!! 🤙🤙🫡

Which tiger model is that?

My harley doesn't have metric bolts,is this an aftermarket clutch?

boa noite sou do brasil nao estou achando o app tune ecu como faco para saber o fabricante do app

As in any procedure regarding my Harley Davidson, first off, I read the manual, then I go for advices like yours here and then proceed to decide how much info from that manual I would use, and how much I would from advice from others; manuals are far from perfect, is better to just consider them as a point of reference. In this case, as you said, the manual says to take this and that, but it does not even tell you to take off the brake line, which of course affects the fall-away process, what's more, all those lines are there all the time so they will affect handling one way or the other; in other words just use common sense and keep things simple.

So, how many total miles do you have on it. I didn't pick that up in the video!

Thanks for all your work with your bike. 6 years later, you are still helping people. Like me, in Hawaii where bike mechanics are very expensive. So easier if I take off like you said. Also thanks for the torque specs. 2015 FJ09 🤙 Mahalo!

Got a question for you

Ok this had me going for a sec, but lowkey the zip tie is a good idea. But, when I saw your placement I laughed so hard lmao. Just got a Ninja 400 as my first bike and having trouble finding a spot for the bell I got at the MSF for getting a perfect score - a zip tie will help, but I think I'll find another spot if you know what I mean

Sorry for the silly question, but do you have to drain all your oil before taking the cover off?

Anyone know the bolt lengths for the crank case cover mentioned at 01:10? Took mine off and had 7 bolts the same length and 1 that was shorter, typical work of my local dealer lol.

Anti Seize...dang .you put a lot on those plugs..When I worked with a race team on off road car..We would never put antiseize on plugs..Somehow someway antiseize finds a way to get in to the gap and foul the plugs..So..perhaps a touch of antiseize..But 🤔🤔

Which tune ecu to download please? There are several to choose from. Cost?

Lock the steer to the left and then put to the left handbar the reminder.

Thanks, this video help me a lot with instalation

Mate had a tyre pressure sensor that needed re programming on his triumph....HE SOLD THE BIKE

when that spring gets weak does it cause the clutch to not fully release and the bike wants to keep moving while you are trying to stop?

Will this work on my HD?

🤣😂🤣 I have a 2012 Electra glide and a 2013 Tiger!

Is this usual? Whenever valve clearance checks are done on Japanese bikes people say they've been way over the recommended mileage and still within spec.

I went with these tires on my Kawasaki Versys 650. I was very happy with the better wet and rough stuff performance. Even on the road they were more predictable.

Thank you for the video. It helped give me the confidence to perform the same service on my tiger 1050. I went a little heavy on the grease.

That's way more than a 6hp increase. More like ten to fourteen.

Just great ! You rock ! Is the removal of the abs senser an absolute ? Because in the HAYNES manual they don’t mention removing it at all … thanks for your great video !

Thanks for the vid, helped me find the blue plug. I found plugging it all in very easy on my 2023 CRF300L. I was able to unplug it with long nose pliers from underneath then tuck it all in neatly.

EASY WAY: hammer a nut into the bearing, tack it in place and smack it with a rod from the other side

That's for the vid bro🫡 some people are just naturals !

why did you remove and replace the cam sprocket bolts?

I drilled extra holes on my brake caliber worked grate until it started spurting brake fluid everywhere! Why?😅

🤣 🤣 🤣

I have seen the way it suppose to be but I don't let anyone but me to work on any maintenance equipment I have and I would be comfortable doing that project the way you showed. Thanks👍

Hola cual aplicación utilizas para conectarte por favor ?gracias desde España

Glad I watched your video. I like your method better! I have to do this on my Sportster and my Electra Glide.

And, of course, it’s Android based. Like ANYONE uses Android…

When you say you're applying a little "blue", what strength of threadlock are you using? Useful video though. Thanks.

Alberta boy nice.... Is there any modifications to get better airflow?.. Galileo Vince pipe coming for my tiger in Calgary eh.. just got it f****** love it park next to the Harley 👍💯🤣👌

Not a bad option, I have DealerTool though since I had a Windows computer along the additional things that DealerTool Tool does, the price is not bad and still saves on dealer service costs, just for resetting the light.

your pinch bolts are still tight while your making the adjustment.

I’m glad you know how to do this stuff. My bike is in the shop. After watching your video I think I made the right choice having a “real” technician do the work instead of me

What app you downloaded please?

This BS is absolutely keeping me from buying Triumph!! Damn shame their greed is costing them the sale

hey it looks good to me. thats exactly how i do it!

would this work on a Triumph rocket 3 gt from 2021 do you think? factory warrenty is over anyway so no point for me to keep bringing it to a dealer when im a mechanic and know what i am doing. the OBD2 scanner i have at work does not speak triumph :D

TuneECU now works with 2024 Street Triple 765 to reset SEL. You need an Android device, an OBD to 6 pin connector on the bike (Amazon about $10), OBD BT module like OBDLink MX+ and follow instructions in this video and in the app. May cost about $200 if you buy all these items but quickly pays for itself compared to dealer visit and now you have a powerful servicing tool for your bike.

youtube.com/@AUTOT3KHCL In what kind of "kit" did the air filter come with?! please explane more! xD I'm always putting together lists and making orders at my local triumph mechanic/store... Where do you buy these kits?

Did the valves on my buddy's Legend 900 at about 70,000 miles. Three valves were slightly out of spec but still running fine. You are being picky. It will run just fine until the gap is zero then the bike is hard or no start.